Garmin G2000 - Inverting a Flight Plan

190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
273
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeS inDeX
Waypoint
Selection
Button
Figure 5-122 Active Flight Plan Screen - Activating a Flight Plan Leg
OK Button
Activate
Leg to
Waypoint
Button
Selected Leg
Destination
Waypoint
Cancel
Button
Current
Active
Flight Plan
Leg
New Active
Flight Plan
Leg
inverting a Flight plan
Any flight plan may be inverted (reversed) for navigation back to the original departure point.
Inverting the active flight plan:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Invert Button
3) Touch the Yes Button in response to “Invert active flight plan?” The active flight plan leg is inverted. To cancel
the request, touch the No Button.
Inverting and activating a stored flight plan:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Scroll the list if necessary and touch a flight plan selection button to display the Catalog Options Window.
4) Touch the Invert and Activate Button.
7) Touch the OK Button in response to “Invert and Activate Selected Flight Plan and Replace Current Active
Route?” The stored flight is inverted and becomes the active flight plan. The stored flight plan is not modifed.
To cancel the request, touch the Cancel Button.
This manual downloaded from http://www.manualowl.com