190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
507
AdditionAl FeAtures
sYsteM
oVerVieW
FliGHt
instruMents
eis
Audio PAnel
& Cns
FliGHt
MAnAGeMent
HAZArd
AVoidAnCe
AFCs
AdditionAl
FeAtures
APPendiCes indeX
AIRPORT DIRECTORY DATABASE CYCLE NUMBER AND REVISION
The Airport Directory database is revised every 56 days. Check fly.garmin.com for the current database. The
Airport Directory is always available for use after the expiration date. When turning on the system, the Power-
up Display indicates whether the databases are current, out of date, or not available.
Figure 8-36 Power-up Page, Airport Directory Database
Airport Database
Power-up Display Definition
Normal operation. Airport Directory database is valid and within
current cycle.
Airport Directory database has expired.
Database card contains no Airport Directory data.
Table 8-4 Airport Directory Annunciation Definitions
The Airport Directory ‘Region’, ‘Version’, ‘Cycle’, ‘Effective’ date and ‘Expires’ date of the database cycle can
also be found on the Touchscreen Controller, as seen in Figure 8-37.
Viewing Airport Directory database information:
1) From the Home Screen, touch Utilities > Setup > Avionics Status.
2) Touch the Database Tab.
3) Touch the button corresponding to the display (MFD1, PFD1, or GTC1) for which the database information will be
viewed.
This manual downloaded from http://www.manualowl.com