Garmin G2000 - Page 137

190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
123
Audio And CnS
SYSTEM
oVERViEW
FLiGHT
inSTRuMEnTS
EiS Audio & CnS
FLiGHT
MAnAGEMEnT
HAZARd
AVoidAnCE
AFCS
AddiTionAL
FEATuRES
APPEndiCES indEX
1
COM/NAV Window – Provides COM/NAV active and standby frequency selection, volume adjustment for
each COM/NAV, COM MIC selection, and COM MON selection. The selected COM transceiver frequency
is displayed in green.
2
Active NAV Window – Displays active NAV station ID, frequency, and DME distance.
3
Selected Source/Frequency Box – Displays selected communication source and frequency. .
4
ENT Key – Confirms a selection and moves the cursor to the next data field.
5
CLR Key – Cancels entries or removes menus.
6
PFD Knob – Large PFD Knob moves the cursor from field to field. Small PFD Knob activates menus, makes
selections, or activates the blinking editing cursor when the cursor is on the standby frequency. When the
cursor is blinking on the standby frequency, the PFD Knob tunes the standby frequency for the selected
source (large knob for MHz; small knob for kHz). Press the PFD Knob to confirm the frequency and move
the cursor to the next data field. Press and hold to transfer the standby frequency to the active frequency.
7
COM/NAV Button – Displays/removes the COM/NAV Window on the PFD.
This manual downloaded from http://www.manualowl.com