Garmin G2000 - Page 410

Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
396
Hazard avoidance
SYSTeM
overvieW
FLiGHT
inSTrUMenTS
eiS
aUdio & cnS
FLiGHT
ManaGeMenT
Hazard
avoidance
aFcS
addiTionaL
FeaTUreS
aPPendiceSindeX
Enabling/disabling lightning information on Navigation Pap Panes:
1) From Home, touch Map > Map Settings.
2) If necessary, touch the Sensor Tab.
3) Scroll as needed and touch the Stormscope Lightning Button to enable/disable lightning information.
Figure 6-77 Enabling Stormscope Information for the
Navigation Map Pane
Stormscope
Lightning
Enabled
Selecting a Stormscope mode for the Navigation Map Pane:
1) From Home, touch Map > Map Settings.
2) If necessary, touch the Sensor Tab.
3) Scroll as needed and touch the Stormscope Lightning Settings Button.
4) Touch either the Cell Button or the Strike Button. Button annunciator is green for currently selected mode.
5) When finished, touch Back or Home.
Figure 6-78 Stormscope Settings for the
Navigation Map Pane
Stormscope
Modes
Removes Previous
Lightning
Information from
the Navigation
Map Pane
Provides
Map Range
Controls for
Stormscope
Information
This manual downloaded from http://www.manualowl.com