190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
33
SyStem Overview
SyStem
Overview
FLiGHt
iNStrUmeNtS
eiS
AUDiO PANeL
& CNS
FLiGHt
mANAGemeNt
HAZArD
AvOiDANCe
AFCS
ADDitiONAL
FeAtUreS
APPeNDiCeS iNDeX
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS AUDIO & CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Using the Touchscreen Controller’s large and small right knobs to enter data:
1) Select a datafield button on the Touchscreen Controller for which data entry is required (i.e. waypoint, radio
frequency, etc.). A keypad will appear, and the data field will be highlighted in light blue.
2) Begin entering data by turning the Small Right Knob to select a character for the first placeholder.
Turning the knob to the right cycles through the alphabet (where appropriate) toward the letter Z, starting in
the middle at K, and the digits zero through nine. Turning the knob to the left cycles in the opposite direction.
3) Turn the Large Right Knob to move the cursor to the next placeholder in the field.
4) Repeat, using the Small Right Knob to select a character and the large right knob to move the cursor, until
the field is complete.
5) Press the Right Knob to confirm entry. Otherwise, touch the Back or Home button to exit the field without
saving the entry.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
