190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
51
SyStem Overview
SyStem
Overview
FLiGHt
iNStrUmeNtS
eiS
AUDiO PANeL
& CNS
FLiGHt
mANAGemeNt
HAZArD
AvOiDANCe
AFCS
ADDitiONAL
FeAtUreS
APPeNDiCeS iNDeX
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS AUDIO & CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Adjusting cabin temperature:
1) From Home, touch Aircraft Systems > ECS.
2) Touch and slide the temperature slider as shown in Figure 1-34.
Or:
Touch the + pointer to increase the temperature, or - pointer to decrease the temperature. Each touch increases
or decreases one degree.
The selected cabin temperature is displayed above the temperature slider. The actual cabin temperature is
displayed to the left of the selected temperature as shown in Figure 1-34.
Setting fan mode:
1) From the Home Screen, touch Aircraft Systems > ECS.
2) Touch the Mode Button to select Manual or Auto. Each touch of the button switches between manual and
automatic mode. Auto mode is selected in Figure 1-34. Manual mode allows the fan speed to be adjusted
manually. Auto mode allows the ECS to determine proper fan speed for the selected temperature.
Adjusting manual fan speed:
1) From the Home, touch Aircraft Systems > ECS.
2) If needed, touch the Mode Button to display ‘Manual’ on the button label.
3) Touch and slide the fan speed slider as shown in Figure 1-34.
Or:
Touch the + pointer to increase fan speed, or - pointer to decrease fan speed. Each touch increases or decreases
ten percent. The manual fan speed setting is displayed above the fan speed slider.
Enabling/Disabling windshield defogging:
1) From the Home, touch Aircraft Systems > ECS.
2) If necessary, enable the ECS by touching the ECS ON Button.
3) Touch the DEFOG Button. A green annunciator indicates defogging is enabled. A gray annunciator indicates
defogging is disabled.
Enabling/Disabling the air-conditioning system:
1) From Home Screen, touch Aircraft Systems > ECS.
2) If necessary, enable the ECS by touching the ECS ON Button.
3) Touch the A/C Button. A green annunciator indicates air-conditioning is enabled. A gray annunciator indicates
air-conditioning is disabled.
This manual downloaded from http://www.manualowl.com