190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
57
SyStem Overview
SyStem
Overview
FLiGHt
iNStrUmeNtS
eiS
AUDiO PANeL
& CNS
FLiGHt
mANAGemeNt
HAZArD
AvOiDANCe
AFCS
ADDitiONAL
FeAtUreS
APPeNDiCeS iNDeX
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS AUDIO & CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
DEPARTURE TIME
The system records the time at which departure occurs. The departure time is selectable as either from the
time the system was powered-up, or when the aircraft becomes airborne. The displayed departure time can
also be reset to display the current time at the point of reset.
Setting the departure timer starting criterion:
1) From Home, touch Utilities > Trip Stats.
2) Touch the Departure Time Start At Button.
3) Touch either the Power On or In-Air Button. A green annunciator indicates the selected option.
4) Touch the Accept Button.
Resetting the departure time:
1) From Home, touch Utilities > Trip Stats.
2) Touch the ‘Departure Time’ Datafield Button.
3) Touch the Reset Button.
ODOMETER
The Odometer presents a total distance traveled since the last reset.
Setting the odometer automatic reset criterion:
1) From Home, touch Utilities > Trip Stats.
2) Touch the Odometer Reset Button (Figure 1-40).
3) Touch the Power On, In-Air, or Manually Button. A green annunciator indicates the selected option. Note
manual reset is always available regardless of the option selected for automatic reset.
4) Touch the Accept Button.
Manually resetting the odometer:
1) From the Home, touch Utilities > Trip Stats.
2) Touch the Odometer distance button (shows current odometer reading in light blue).
3) Touch the Reset Button to reset the odometer, or touch the Cancel Button.
TRIP ODOMETER
The Trip Odometer presents a total distance traveled for the active flight plan since the last reset.
Setting the Trip Odometer automatic reset criterion:
1) From Home, touch Utilities > Trip Stats.
2) Touch the Trip Odometer Reset Button (Figure 1-40).
3) Touch the Power On, In-Air, or Manually Button. A green annunciator indicates the selected option. Note
manual reset is always available regardless of the option selected for automatic reset.
4) Touch the Accept Button.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
