GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 8-3 - Software Loading Procedure 8-125
8-3-5-3 Printer setting Back-up
Before starting upgrade, write down, print out or save the printer setting for back-up.
NOTE: All the customized image setting of digital printer will be lost after software loading. Take the
back up and restore all the digital printers setting at software loading.
NOTE: This printer setting is for only digital printers, not analog printers.
1.) Insert the CD or removable media and Format.
2.) Go to Utility -> System -> Peripherals and click the Printers.
3.) Press the left button of the trackball on the printer which need to be backup -> Click “properties”.
Figure 8-168 Printer set backup
Figure 8-169 Printer set backup

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%