GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 8-6 - Software Reloading 8-177
8-6-2-2 Software Reloading (cont’d)
15.)Change the Date and Time correctly if needed.
16.)Press “Apply”
17.)Press “OK”
18.)Turn off the system.
19.)Start the system.
20.)Check if the correct date and time are displayed.
21.)The software reloading is completed.
Figure 8-245 Date and Time check
To Next Page
Loading...
