GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
8-182 Section 8-7 - Mechanical Option Installation instruction
8-7-3 BT11 BW Printer Option Installation (cont’d)
4.) Connect the PRT CABLE ASSY 3 (5168835-2) between BW PRINTER and SYSTEM REAR
PANEL.
Attach the CABLE MOUNT (5399222) on the REAR COVER and fix the cable as the picture below.
5) Finished feature of BW PRINTER option.
Figure 8-252 BT11 BW PRINTER Option Installation
Figure 8-253 BT11 BW PRINTER Option Installation

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%