Configure Settings
Delete MUSE SSL CA Certificate
Before you start this procedure, make sure that your user role is assigned with user
management privilege.
1. Select Settings > Workflow > Order Manager.
2. Select MUSE to view the MUSE server settings.
3. Perform the steps below to delete the currently installed MUSE CA certificate:
a) Select Browse from the Install Certificate field.
The currently installed certificate displays.
b) Select Delete.
A message displays asking you to confirm the deletion of the certificate.
c) Select OK. The certificate or key is deleted.
4. Select Back to view the MUSE server setting screen.
Configure Display Filter Groups
Make sure that order management is enabled and the MUSE server is configured. See
Configure Order Management on page 186.
A display filter group displays the configured group of locations at your facility. You
can filter the orders in the Orders view based on the selected location. You can
configure a maximum of 10 display filter groups.
1. Select Settings > Workflow > Order Manager.
2. Select Orders.
The Order Manager screen displays.
192  MAC
â„¢
5 A4/MAC
â„¢
5 A5/MAC
â„¢
5 Lite 5864335-001-1
To Next Page
Loading...
Need help?
General
