GRASS VALLEY KAYENNE - V2.0 - Page 285

KAYENNE — User Manual 285
Copy/Swap
when Copy is touched P2 replaces the ME 2, Primary Wipe 1-P1 wipe gener-
ator as seen in the Wipes, Patterns menu (Figure 191).
Figure 191. Copy Primary Generator
Copying Transition and Keyer Wipes Directly
Copying Transition Wipes
To copy a Transition wipe to a Transition wipe:
1. Touch the ME and Primary (Pri Wipe 1 or Pri Wipe 2) or Secondary (Sec
Wipe 1
or Sec Wipe 2) wipe button in the From panel.
2. Turn on or off the Mattes button: On highlights green.
3. Touch an ME and Primary Wipe button in the To pane.
4. Touch the Copy button.
To copy a Key wipe to a Key wipe
1. Touch the ME and Key Wipe (Key 1 - Key 4) button in the From panel.
2. Turn on or off the Mattes button: On highlights green.
3. Touch an ME and Key Wipe button in the To pane, and if desired,
choose a
Preset Patt, Inhibit Mask, or Force Mask button to copy parameters
from/to.
4. Touch the Copy button.
Wipes, Patterns Menu:
P1 Replaced with P2