GRASS VALLEY KAYENNE - V2.0 User Manual

306 KAYENNE — User Manual
Section 3 — System Operation
Figure 205. Cascading Bus Links
To create cascading links:
1. Touch the Controlling Bus data pad in the Table Setup pane; the
Controlling Bus selection menu is displayed.
2. Touch the ME busses, Aux Busses, or eDPM Inputs tab and touch the desired
bus. The menu closes and returns to the Bus Links menu. The selected
bus is displayed in the
Controlling Bus data pad (in the example in
Figure 205, the selected bus is PGM A).
3. Touch the Linked Bus data pad in the Table Setup pane; the Linked Bus
selection menu is displayed.
4. Touch the ME busses, Aux Busses, or eDPM Inputs tab and touch the desired
bus. The menu closes and returns to the Bus Links menu. The selected
bus is displayed in the
Linked Bus data pad.
5. Touch the Controlling Bus data pad again, in the Table Setup pane; the
Controlling Bus selection menu is displayed. Touch the same bus as is
currently displayed in the
Linked Bus data pad (your previous selection).
The linked bus is now also a controlling bus.

GRASS VALLEY KAYENNE - V2.0 Specifications

General

Brand	GRASS VALLEY
Model	KAYENNE - V2.0
Category	Recording Equipment
Language	English