About This User Manual D1 Servo Drive User Manual
1-4 HIWIN MIKROSYSTEM CORP.
◆ Do not use the product in location which is subject to humidity, corrosive
materials, flammable gas or flammable materials.
◆ Storage
◆ Do not store the product in location which is subject to water, water drop, direct
sunlight, harmful gas or liquid.
◆ Transportation
◆ Carefully move the product to avoid damage.
◆ Do not apply excessive force to the product.
◆ Do not stack the products to avoid collapse.
◆ Installation site
◆ Do not install the product in location with high ambient temperature or high
humidity. Do not install the product in location which is subject to dust, iron
powder or cutting powder.
◆ Install the product in location with ambient temperature stated in the user
manual. Use cooling fan when the ambient temperature is too high.
◆ Do not install the product in location which is subject to direct sunlight.
◆ The product is not drip-proof or waterproof, so do not install or operate the
product outdoor or in location which is subject to water or liquid.
◆ Install the product in location with less vibration.
◆ Motor generates heat while running for a period of time. Use cooling fan or
disable the motor when it is not in use, so the ambient temperature will not
exceed product specification.
◆ Installation
◆ Do not place heavy object on the product, or it may cause injury.
◆ Prevent any foreign matter from entering the product, or it may cause fire.
◆ Install the product in the specified orientation, or it may cause fire.
◆ Avoid strong shock to the product, or it may cause malfunction or injury.
◆ While installing the product, please consider its weight. Improper installation
may cause damage.
◆ Install the product on noncombustible object, such as metal to avoid fire.
◆ Wiring
◆ Ensure wiring is correctly performed. Otherwise, it may lead to malfunction or
motor burn-out, causing a risk of injury or fire.
To Next Page
Loading...
