D1 Servo Drive User Manual Servo Drive Configuration
HIWIN MIKROSYSTEM CORP. 5-9
5.2.1 Setting parameters of motor
D1 servo drive supports linear motor and torque motor. The first page in Configuration center is for setting
motor parameters. The supported motors are listed by groups and can be found under . In
each groups, user is able to select HIWIN motors, such as LMC, LMS, TMS, etc.
(1) Linear motor
A. Motor parameters
Select the model of HIWIN linear motor to display and set motor parameters.
B. Operation parameter
Moving mass: Set the load mass of motor, including forcer and its housing. (Unit: kg)
Figure5.2.1.1
Note:
If the peak current of the selected motor exceeds the peak current of the servo drive, a warning dialog will
appear to inform user that the motor may have a weaker performance.
Operation parameter
setting area
Motor parameter
setting area
To Next Page
Loading...
