Hiwin D1 - Specifications; Safety Certificates and Model Explanations; Safety Certificates

Specifications D1 Servo Drive User Manual
2-2 HIWIN MIKROSYSTEM CORP.
MD20UE01-2109
2.1 Safety certificates and model explanations
2.1.1 Safety certificates
D1 servo drive complies with the following safety standards.
◼ CE compliance
Table2.1.1.1
EMC
EN61800-3: 2004 (Category C3)
EN61000-3-2: 2006/A1: 2009/A2: 2009
EN61000-3-3: 2008
EN61000-6-2: 2005
IEC CISPR 11: 2009/A1: 2010
IEC61000-4-2: 2008
IEC61000-4-3: 2006/A1: 2007/A2: 2010
IEC61000-4-4: 2004
IEC61000-4-5: 2005
IEC61000-4-6: 2008
IEC61000-2-1: 1990
IEC61000-2-4: 2003
IEC60146-1-1: 1993
LVD
EN 61800-5-1: 2007