Hiwin D1 - Main Window

Servo Drive Configuration D1 Servo Drive User Manual
5-6 HIWIN MIKROSYSTEM CORP.
MD20UE01-2109
Figure5.1.2.5
Figure5.1.2.6
5.1.3 Main window
After connection is established, the main window of Lightening is shown as figure 5.1.3.1. Right click on
the axis and select Rename to change axis name, or directly click on the axis to change axis name.
Figure5.1.3.1
Toolbar
Axis name
Connection area
Status display area
Error message
display area
Signal monitoring area
Connection status
Right click on the axis
to show this list
One slave is connected.