D1 Servo Drive User Manual Wiring
HIWIN MIKROSYSTEM CORP. 4-37
(4) D1-EMC4
Figure4.10.4
C. Harmonic suppression reactor
Table4.10.28
1. The servo drive complies with EN61000-3-2
Class A.
2. Reactance: 2 mH (at 60 Hz 16 A/220 V)
3. Connect to L1 and L2 on the servo drive.
(6) Regenerative resistor
Table4.10.29
68 Ω
Rated power: 100 W
Instantaneous power: 500 W
120 Ω
Rated power: 300 W
Instantaneous power: 1500 W
50 Ω
Rated power: 150 W
Instantaneous power: 750 W
50 Ω
Rated power: 600 W
Instantaneous power: 3000 W