Hologic Panther System - Page 416

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
389
Appendix C. System Messages
Code Message Possible Cause Solution
407.006.00014 ISBT 128 check
digit overridden for
sample: {0}
N/A No action necessary.
407.006.00015 Dilution factor of {0}
set for sample: {1}
The sample dilution
function is currently
disabled.
No action necessary.
407.006.00016 Sample {0} has
been selected for
reflex testing
Samples were
accepted with LIS
reflex test
associations.
No action necessary.
407.006.00018 Sample Loading
defaults set: {0}
Assay.
Set assay defaults
are applied to the
Sample Rack Bay
screen.
No action necessary.
407.007.00001 Fluids priming
started
N/A No action necessary.
407.007.00002 MTUs loaded MTUs were loaded
and the drawer was
locked.
No action necessary.
407.007.00003 Sample pipetting
paused
Pause was selected
on Sample Rack
Bay screen
No action necessary.
407.007.00004 Sample pipetting
resumed
Resume was
selected on Sample
Rack Bay screen.
No action necessary.
407.008.00001 Maintenance action
started: {0}
N/A No action necessary.
407.009.00001 System state
entered: {0}
N/A No action necessary.
Table 118. System Messages (Continued)