FusionModule2000 Smart Modular Data Center
Installation Guide
10 Installing the Aisle Containment
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 10-23 Assembling a door frame
2. Secure the left and right posts to the upper frame mounting kit using six M6x16 screws,
as shown by (3) in Figure 10-23.
To facilitate assembly, lay the posts and upper frame mounting kit on the floor.
After the assembly is complete, verify that the posts are flush with the upper frame mounting kit.
3. Stand the door frame, and partially secure (do not fully tighten the fasteners) left and
right posts to the skylight connective plates using four M6x16 screws, flat washers, and
nuts, as shown by (1) in Figure 10-24.
To Next Page
Loading...
Need help?
General