Huawei FusionModule2000 - Page 125

FusionModule2000 Smart Modular Data Center
Installation Guide
10 Installing the Aisle Containment
Issue 02 (2018-03-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
116
Figure 10-25 Installing glass door rubber strips

Verify that the rubber strips are closely attached to the glass doors.

The rubber strip baffle plate outside the glass doors should face the aisle containment, and
the top of the rubber strip should be flush with the glass doors, as shown by (1) in Figure
10-25.

The rubber strip attaching surfaces at the inner side of the glass doors should be parallel,
and the top of the rubber strip should be flush with the glass doors, as shown by (2) in
Figure 10-25.

The rubber strip baffle plates under the glass doors should be installed outside the aisle
containment, and the rubber strip width should be the same as the glass door width, as
shown by (3) in Figure 10-25.
2. Snap the guide rail into the upper frame mounting kit. Secure the guide rail to the door
frame using five M6x16 screw assemblies, as shown by (1) in Figure 10-26.