Hypertherm MicroEdge - Files; Hard Drive File Name; Preview

Files 97
The Save from list selects whether you save from the current part or from a directory on the hard disk.
To add or remove a directory, double click on the touch screen where indicated.
Keypad operation: To select a different directory, use the  and  keys on the keyboard. To add a
new directory, use the + key on the keyboard. To remove a directory, use the - key on the keyboard.
Note: This selection is only available if saving to the Diskette or USB memory stick from the hard
drive.
Files
The Files list box is a list of all the files that are in the Load from directory that can be loaded from the
disk. To remove a file, double click on the touch screen where indicated.
Keypad operation: To scroll through different files, use the , , PAGE UP and PAGE DOWN keys
on the keyboard. To remove a file, use the - key on the keyboard. To select multiple files to load,
highlight the first file selection, then use the  and  keys while pressing the shift key to highlight the
remaining files. Note: This selection and Multiple file selection are only available if saving to the
Diskette or USB memory stick from the hard drive.
Hard drive file name
The Hard drive file name is the name that you are giving to the file loading on the hard drive. Note:
This selection is only available if saving to the Diskette or USB memory stick from the hard drive.
Preview
When checked, the Preview checkbox allows the file that is selected in the Files listbox to be
previewed.
Keypad operation: To check or uncheck the box, press the SPACE key on the keyboard when the
Preview box has the focus. Note: This selection is only available if saving to the Diskette or USB
memory stick from the hard drive.