Edge Ti™ 502
Switch SW1-1 and SW1-2
I/O Mating Connector
The I/O connector is a standard sex circular CPC connector from AMP
Connector AMP 16C #206037-1
Backshell AMP #206070-1
Sockets 20-24AWG AMP #66105-3
I/O Setup Screen
The I/O setup screen is used to define inputs, outputs and their logic state.
Note: The input logic for the first twelve I/O would need to be inverted for Dry Contact Mode Inputs
so that logic state is shown correctly for operational mode. An Inputs Inverted parameter has been
provided for this purpose.
To Next Page
Loading...
