MicroEdge™ 489
Drive/Encoder Connector
The Drive/Encoder connector is a reverse sex circular CPC connector from AMP. This connector
was specifically chosen for its rugged industrial design and its metal insulation characteristics for
EMI/RFI noise immunity.
NOTE: For optimum noise immunity, cable shields may be tied externally to the control enclosure or
to the metal AMP connectors.
Drive/Encoder Mating Connector and Cable
Connector AMP #208472-1
Backshell AMP #208945-8
Pins (16-18 ga) AMP #66099-3
Pins (20-24 ga) AMP #66103-3
Cabling: Use Belden # 9504 or equivalent for encoder signals
Cabling: Use Belden # 9501 or equivalent for drive signals
Axes Assignments
Axes Axes Assignment
1 (X) Transverse or Rail
2 (Y) Transverse or Rail
3 (Z) Dual Gantry, CBH, Rotate or THC
4 (W) CBH, Tilt or THC
To Next Page
Loading...
