Hypertherm MicroEdge - Command Thc; Clear Error

Command™ THC 397
Command THC
The Command
®
THC from Hypertherm
®
is an automated Torch Height Control system which adjusts
the distance between the Plasma torch and the work surface for improved cut quality. Once enabled
in password protected setups, operational parameters for the Command
®
THC may be configured at
the Plasma Setups Screen for use. For additional information on the use of the Command
®
THC,
please refer to the operating instructions provided with the THC system.
Clear Error
The Clear Error soft key allows the user to clear an error at the Command
®
THC control box. After
the soft key has been pressed, a message will be posted on the control displaying a description of the
error.