Overview 23
Nester™ is a proprietary part nesting program which allows the operator to manually group or nest
selected parts together as one part program to conserve raw materials and maximize machine
utilization.
An optional Automatic Nesting feature is available as an add-on item to Nester™. This true shape,
single station, automatic nesting package allows quick and simple nesting of profiles on to selected
material sizes. This feature is offered as a limited use trial version. Please contact your control
vendor for information on adding this feature.
HyperCAD
The optional HyperCAD
®
feature is an easy to use 2D drawing application specifically designed for
shape cutting. The software‟s powerful CAD utilities let users import DXF and CNC files or draw from
scratch. Files can be converted to graphical parts for editing and saving or go directly to cutting.
HyperNEST
The optional HyperNEST
®
feature is a full featured, automatic true shape application designed to
allow quick and simple nesting of profiles onto standard material sizes. With its advanced Graphical
User Interface, HyperNEST
®
greatly improves the output of any shape cutting operation.
Evaluation Timer
Trail version software will prompt the user with a notification of the number of “uses” left at each
launch. To enable unlimited use, a password would be provided by the control vendor.
To launch the trial software, select the Evaluation Version.
Example:
To Next Page
Loading...
