Phoenix Link 366
Folder
The Folder setup parameter allows the operator to change the path of the Master Folder (Parts
Folder). Sub folders and the part files within this Folder will be viewed at the control.
Files
The files setup parameter allows the user to indicate which file extensions will be recognized as
acceptable part program files for download by the link software and will be viewed at the control.
Settings
The Settings setup parameter allows the user to configure the link to allow the Auto Reload (M65)
feature to be enabled and recognized during communication. Additionally, the user may also select
to communicate to multiple controls using the Multi Drop feature and configure it for use.
Test
The Test feature is used to test the operation of the selected communications port. To test, simply
connect the transmit and receive signals on the selected communications port by inserting a paper
clip and click on the desired port to test. The status of the test will be displayed in the lower left
corner of the window.
Help
Selecting Help will display the current version of link software being used.
To Next Page
Loading...
