Setups 58
Cut Chart
A cut chart database allows the user to select factory recommended settings or amend the database
for personalized settings. The Cut Chart information can be saved or loaded via the hard drive,
floppy drive or USB memory stick. The Cut Chart files contain the factory recommended settings that
are available from Hypertherm
®
.
Notes:
- Please refer to the FAST Laser™ operators manual for complete information on the operation
and setup of the FAST Laser™ head.
- The FAST Laser™ Laser parameters must first be enabled in the password protected Station
Configuration screen to allow use of the Cut Chart Information
- Specific Material, Process Power, Assist Gases, Material Thickness, Focal Length and Nozzle
data fields allow new values to be added. Double click on the field to enter an new value or press
the Plus key “+” to add or “-“ to delete on the keypad.
To Next Page
Loading...
Need help?
General
