Hypertherm MicroEdge - Pattern OffsetY Pattern Offset; Scrap Clearance; Nest DistanceY Nest Distance; Staggered Repeat

Part Options 246
X Pattern Offset/Y Pattern Offset
The control automatically calculates the pattern offset based on the dimension of the current part in
memory.
Scrap Clearance
Allows the user to insert scrap clearance between parts in the grid pattern. The same value is used
for X and Y dimensions.
X Nest Distance/Y Nest Distance
The control automatically calculates the nest offset based on the dimension of the current part in
memory. This parameter is only available for the Nested type of repeat.
Staggered Repeat