Lexmark T652 - Page 82

Error code Description Action
202.07 Sensor (fuser output) lingering jam (type 1 fuser)
Media reached the sensor (fuser output), but did
not clear it in the specified time
Go to
“Sensor (fuser output) lingering jam
service check” on page 89
202.09 Sensor (fuser output) lingering jam (type 1 fuser)
Media reached the sensor (fuser output), but did
not clear it in the specified time
202.10 Sensor (fuser output) lingering jam (type 1 fuser
and destination is output option)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and did not reach
the sensor (narrow media).
202.11 Sensor (fuser output) lingering jam (type 1 fuser
and destination is standard bin)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and also reached
the sensor (narrow media).
202.12 Sensor (fuser output) lingering jam (type 1 fuser
and destination is output option)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time, and also reached
the sensor (narrow media).
202.13 Sensor (fuser output) static jam and sensor
(narrow media) static jam (type 1 fuser)
Media remains on the sensor (fuser output) and
the sensor (narrow media) during the warm‑up
sequence.
Go to
“Paper jam around fuser exit or redrive
area service check” on page 87
202.25 Paper jam around fuser exit or redrive area (type
2 fuser)
Page may be jammed in fuser exit or redrive area.
202.26 Sensor (fuser output) lingering jam (type 2 fuser
and destination is standard bin)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and did not reach
the sensor (narrow media).
Go to
“Sensor (fuser output) lingering jam
service check” on page 89
202.27 Sensor (fuser output) lingering jam (type 2 fuser)
Media reached the sensor (fuser output), but did
not clear it in the specified time.
202.28 Sensor (narrow media) static jam (type 2 fuser)
Media remains on the sensor (narrow media)
during the warm‑up sequence.
Go to
“Sensor (narrow media) static jam
service check” on page 91
202.29 Sensor (fuser output) bounce (type 2 fuser)
The sensor (fuser output) rebounded once the
trailing edge of the media passed.
Go to
“Sensor (fuser output) service check” on
page 77
4062
Diagnostic information
82