Lexmark T652 - Page 84

Error code Description Action
202.53 Sensor (narrow media) static jam (type 1 fuser and
fuser page count exceeded life)
Media remains on the sensor (narrow media)
during the warm‑up sequence.
Go to
“Sensor (narrow media) static jam
service check” on page 91
202.54 Sensor (fuser output) bounce (type 1 fuser and
fuser page count exceeded life)
The sensor (fuser output) rebounded once the
trailing edge of the media passed.
Go to
“Sensor (fuser output) service check” on
page 77
202.56 Sensor (fuser output) static jam (type 1 fuser and
fuser page count exceeded life)
Media remains on the sensor (fuser output) during
the warm-up sequence.
Go to
“Sensor (fuser output) static jam service
check” on page 90
202.57 Sensor (fuser output) lingering jam (type 1 fuser
and fuser page count exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time.
Go to
“Sensor (fuser output) lingering jam
service check” on page 89
202.59 Sensor (fuser output) lingering jam (type 1 fuser
and fuser page count exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time.
202.60 Sensor (fuser output) lingering jam (type 1 fuser,
destination is output option, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and did not reach
the sensor (narrow media).
202.61 Sensor (fuser output) lingering jam (type 1 fuser,
destination is standard bin, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and also reached
the sensor (narrow media).
202.62 Sensor (fuser output) lingering jam (type 1 fuser,
destination is output option, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time, and also reached
the sensor (narrow media).
4062
Diagnostic information
84