Lexmark T652 - Page 85

Error code Description Action
202.63 Sensor (fuser output) static jam and sensor
(narrow media) static jam (type 1 fuser and fuser
page count exceeded life)
Media remains on the sensor (fuser output) and
the sensor (narrow media) during the warm‑up
sequence.
Go to
“Paper jam around fuser exit or redrive
area service check” on page 87
202.75 Paper jam around fuser exit or redrive area (type
2 fuser and fuser page count exceeded life)
Page may be jammed in fuser exit or redrive area.
202.76 Sensor (fuser output) lingering jam (type 2 fuser,
destination is standard bin, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time, and did not reach
the sensor (narrow media).
Go to
“Sensor (fuser output) lingering jam
service check” on page 89
202.77 Sensor (fuser output) lingering jam (type 2 fuser
and fuser page count exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time.
202.78 Sensor (narrow media) static jam (type 2 fuser and
fuser page count exceeded life)
Media remains on the sensor (fuser output) and
the sensor (narrow media) during the warm‑up
sequence.
Go to
“Paper jam around fuser exit or redrive
area service check” on page 87
202.79 Sensor (fuser output) bounce (type 2 fuser and
fuser page count exceeded life)
The sensor (fuser output) rebounded once the
trailing edge of the media passed.
Go to
“Sensor (fuser output) service check” on
page 77
202.81 Sensor (fuser output) static jam (type 2 fuser and
fuser page count exceeded life)
Media remains on the sensor (fuser output) during
the warm-up sequence.
Go to
“Sensor (fuser output) static jam service
check” on page 90
4062
Diagnostic information
85