L-INX User Manual 54 LOYTEC
Version 4.0 LOYTEC electronics GmbH
Figure 36: Device Information Page.
The device information page shows information about the L-INX and the current firmware
version. It also contains operational parameters, such as free memory, system temperature
and supply voltage.
Click through the menus on the left hand side to become familiar with the different screens.
If you click on Config in the left menu, you will be asked to enter the administrator
password in order to make changes to the settings as shown in Figure 37. Enter the default
administrator password ‗loytec4u‘ and select Login. Note, that firmware versions previous
to 4.0 used ‗admin‘ as the default password.
Figure 37: Enter ‗admin‘ as the default administrator password.
The Config menu opens. Click on Passwords in the Config menu, which opens the
password configuration page as shown in Figure 38. The device has three user accounts: (1)
guest allows the user to view certain information only, e.g., the device info page. By default
the guest user has no password. (2) operator is able to read more sensible information such
as calendar data. (3) admin has full access to the device and can make changes to its
To Next Page
Loading...