To Next Page

To Previous Page

dot2 User Manual

5.43. Off key

Off can be used to turn off active executors or to remove values from your programmer.

Off an executor

If you need to turn off an executor you can press Off then any key associated to the executor.

You can also be specific using the keys:

Off Exec 1 Please

Off can also be assigned to an executor key using the Assign command ( + Label ) or the Change Function of

Executors Buttons window.

Off fixtures or values

You can remove values or fixture from your programmer by pressing Off followed by what you want to remove.

If you need to remove an entire fixture you can press Off followed by the fixture in a fixture view or using the

command

Off Fixture 1 Please

Will remove fixture one from the programmer.

You can remove an entire Preset Type from your programmer for the currently selected fixtures by pressing Off

followed by pressing the preset type in the preset type bar on screen 1 or use keys:

Off + 1 Please

This command will remove all dimmer values (preset type 1) in the programmer for the

selected

fixtures.

When you combine the key with numbers then you have direct access to the preset types.

The Off window

You can open an Off window by pressing the key together with the Off key. In the off window you can turn off

and reset different elements like the executors, special masters and the programmer.

MA dot2 User Manual

Other manuals for MA dot2