Delete Show
To delete a show you'll also need to go into the Load Show menu. Here you can select the show you want to delete
and then you tap the trash can icon in the title bar at the top.
You can't delete the demoshows.
Save Show
Tapping the Save Show button or using the encoder to select it and then shortly pressing the encoder, saves your
current show using the already given name.
This can also be done with you are not in the Backup menu, by pressing the Backup key twice (like
double clicking a mouse).
Save Show as...
Tapping the Save Show as... button or using the encoder to select it and then shortly pressing the encoder opens
the Save Show as... window. Here you can save your current show under a different name. It looks a lot like the
New Show window. It basically an input field and the on screen keyboard.
You can exit the Backup menu by pressing the Backup key. the Esc key or the Esc in the upper left corner.
This takes you out of the Backup menu without making any changes.
In many of the windows opened by the backup menus you'll have an Ok button in the upper right corner. This can
be used to confirm your choice of name or selection of show file to load.
Related links
Backup Menu
New Show window
Load Show window
Save Show as... window
4.4. How to use the command line
The dot2 is actually a command line console. Everything that happens is also a command that's executed in the
command line.
To learn more about the actual command you can write, please have a look at the commands section in this
manual (also link below).
To Next Page
Loading...
Need help?
General