Related Links
New Show View
Load Show View
Save Show As View
How to Save and Load a Show?
6.5. Beam Preset Type View
To go to the Beam Preset Type View, tap Beam in the Preset Type Bar.
- or -
Press and hold and press 5 , for preset type 5 (= Beam).
The beam preset type view is only active if the selected fixture has a beam attributes.
The beam preset type view is fragmented in the Shutter/Strobe/Iris View, the Prisma 1 View and the Raw Beam
Views (depending on the fixture types).
To open the beam effects view at screen 1, tap at in the title bar.
If an effect is running on a selected fixture, the beam preset type view change into an effect mode and get a blue
effect mode title bar.
Shutter/Strobe/Iris View
The Sutter/Strobe/Iris View is the first tab of the beam preset type view.
In the shutter/strobe/iris view, you control the the strobe in hertz (Hz), the strobe duration in seconds (s) and the iris in
percent (%).
Strobe
To Next Page
Loading...
Need help?
General