The first cue of the cue list will be executed.
The top command is basically a Goto command.
Syntax
1. Jump directly to the top of a cue list from an executor.
Top Executor 1
2. Jump with fade time to the top of a cue list from an executor.
Top Executor 1 Fade 3
Example 1
Let´s assume you will jump directly to the top of a cue list from the executor 1.
To get a dimmer output, make sure that the fader of an exutor is not at 0 %.
If the fader is at 0 % you get no dimmer output.
There are three ways to do this:
a) Press + Flash (=Top) and the respective executor button .
b) Press + Flash (=Top) Exec 1 Please .
c) Press + Flash (=Top) and tap on the respective executor in the executor bar view.
The first cue of the cue list will be executed.
Example 2
Let´s assume you will jump to the top of a cue list from executor 1 with the fade time of 3 seconds.
Press + Flash (=Top) Exec 1 Time (=Fade) 3 Please .
The first cue of the cue list will be executed with a fade time of 3 seconds.
Related Links
MA Key
Goto Command
Goto Key
Exec (Executor) Key
7.63. Unpark Command
This page describes the syntax and how to use the unpark command.
To Next Page
Loading...
Need help?
General