Some keys have symbols and when we need to talk about them, I'll show you the key and also introduce the written
word for those keys.
You also need to tap areas on the screen. It will look like this: System Clock
If I need you to write something on the keyboard, I'll write it like this: f 42 at full I might also use this for a quick
demonstration of syntax and commands.
If you need to enter text into the command line using a keyboard (I know you might not know yet what the
command line is) or just look at the actual command the console is about to execute, it'll look like this:
Fixture 42 At Full
And the response from the console would look like this:
Fixture 42 At Full
Please follow the step of this guide and I hope you'll have a great experience with the dot2.
That's it! We should be ready to move on to the next chapter.
2.2. Getting Started Guide - Physical setup and layout - how to connect stuff and
what's what
You should always place your console on a flat and stable surface. It's also a good idea to avoid a dirty and dusty
environment - yeah I know, not often a possibility, but it's recommended anyway .
The back
To Next Page
Loading...
Need help?
General