5.65. Up key
The Up key can be used to scroll or move the cursor up in some views.
It can also be used to change the value of the last touched attribute in the Preset Type Views.
Related link
Down Key
5.66. Update key
Pressing the Update key will store the active programmer values into the current cue.
If you don't specify an executor then it will do it on the main executor.
You can do it on other executors by pressing Update and then one of the keys associated with the executor and
the active running cue you want to update.
If you update an executor that isn't active, then it will update the first cue in that executor.
Related link
Update Command
5.67. View [Eye] key
This is called the View key.
Pressing the key allows you to view different cue lists.
If you follow this key with a Please , then you are shown the cue list of the main executor.
If you press the key and then one of the keys associated with one of the other executors, then you are shown
the detailed cue list for that executor.
Related link
Cue list view
To Next Page
Loading...