To Next Page

To Previous Page

dot2 User Manual

7.7. Black Command

This page describes the syntax and how to use the Black command.

To go to the Black command press and hold the key and the <<< [GoFastBack] key on the console.

Description

With the black command you set the dimmer attribute of an executor to 0 %

temporary, as long as you press and hold the executor

with a command

Syntax

To set the dimmer attribute of an executor to 0 %.

Black

Example 1

Let´s assume you will temporary set the dimmer attribute of executor 3 to 0 % as long as you press and hold the

executor.

Press and hold and <<< [GoFastBack] (=Black) and press and hold the respective executor button .

As long as you hold the executor button, the black command will be executed.

As soon as you leave the executor button, the executor is back in its normal status.

Example 2

Let´s assume you will set the dimmer attributes of executor 3 to 0 %, by a command.

Press and hold and <<< [GoFastBack] (=Black) Exec 3 Please .

The dimmer values are set to 0 %.

To bring a button executor back in its normal status, press the button executor twice.

To bring a fader executor back in its normal status, move the fader to 0 % and up again.

MA dot2 User Manual

Other manuals for MA dot2