Press and hold + On (=Call) and Cue 3 Please .
The cue 3 is called and you see the actual output along with your previous selections of fixtures and their values.
All values of cue 3 are in the programmer and they are storable.
No fixture from cue 3 is selected.
You can still adjust the values of the fixture selection.
If everything looks nice, store cue 4 (=green background with actor on stage) on an executor.
Related Links
What is a Programmer
How to work with Presets
MA Key
On Key
7.10. Clone Command
This page describes the syntax and how to use the Clone command.
To go to the Clone command press and hold the key and Copy on the console.
Clone is in the command line now.
Description
With the Clone command, you copy all values from a fixture to another fixture throughout the entire show file.
This includes cues, presets, and groups. The clone command works like a batch processing for the At command
along with Update command.
Syntax
Clone fixture 1 at fixture 2.
Clone Fixture 1 At 2
Example 1
To Next Page
Loading...
Need help?
General