To Next Page

To Previous Page

dot2 User Manual

5.49. Pause key

The Pause key is used to pause any running fades on an executor. First press Pause then any key associated with

the executor where you need to pause the fade. This will stop the fading where it is.

You can start the fade again by pressing Pause and then the executor or if you need to go back you can

press Go- and then the executor.

Don't mistake this key with the big Pause key under the main executor faders - Read about it here.

Advanced functionality

Pressing the key together with the Pause key will give you access to the Park command. This can be used to

park (or lock) any parameter or fixture.

E.g. you need to park fixture number 1:

+ Pause Fixture 1 Please

This locks all parameters of fixture 1. If you open the DMX view, then you can see the parked fixtures and their DMX

channels indicated by a blue background. Also if you have any parked fixtures you'll see a blue parking icon next to

the command line on screen 1.

Fixtures or attributes can be unparked using the Unpark command or the combination of the and Go+ key.

E.g. you need to unpark fixture number 1:

+ Go+ Fixture 1 Please

If you want to unpark everything then you can also use the Tools menu. Here you'll find a Unpark all DMX channels

button.

MA dot2 User Manual

Other manuals for MA dot2