If you change any of the factory default, then your time key will flash when we are in the "storing" mode. The small
icon with a circle with a cross in it, will reset the timings to the factory defaults.
Moving Executors to a different page
You can move your executors to a different page of executors. Yes that's right, there are several pages of executors.
Press Move and then one of the keys associated with executor number 1. Now press Page+ , this takes us to the
next page. Notice that all our cue lists disappeared. Now press one of the keys associated with executor number 1
again. And then we have moved the cue list that was on executor 1 on page 1 to executor 1 on page 2. Also move
the cue list on executor 2 to page 2.
Try to run the cue on executor 1 on page 2 and then change the page. Notice how there's now a pattern on top of
the executor and there's a text telling you "+1 fixed from Page2". This is because all the running executors should
always be visible. So an active executor get's "fixed" when you change the page. Try to pull the fader down. Now
the executor disappeared - it went back to it's own page.
You can also choose to keep an executor fixed. What have happened so far is what's called "Auto Fix". This means
that when you turn off an executor that comes from a a different page, then it goes back. If you want to keep it then
you can press Fix and then the executor you want to keep Fixed. Try it. To "unfix" an executor again then you press
Fix and then the fixed executor. Please go to the next chapter without any fixed executors.
In the next chapter we are going to make more cues on the main executor.
2.9. Getting Started Guide - Making more cues in main cue list
Now we are going to make more cues in the main cue list and we are going to look at how to play them back.
Do this:
Group Up Stage At 5 0 Please
Store Time 3 Please
This should give you a pop-up with different possibilities.
Select the one called Create a second cue .
That created cue number 2 with a fade time of 3 seconds instead of the default time of 0 seconds.
Try to run the cue to see the fixtures in group 5 fade in.
Let's try to use the command line input instead of the keys.
Locate this on screen 1:
Command Line