6.9. Choose Clone Method Window
If you try to clone a fixture, the console ask to choose the store method.
There are four options available.
Cancel:
Tap to cancel the clone command.
Low Prio Merge:
Tap to add the values from the source fixture to the destination fixture.
If the destination fixture has previous defined values, they will stay.
If the destination fixture has no previous defined values, the fixture will get the values from the source fixture.
Merge:
Tap to add values from the source fixture on the top of the destination fixture.
Overwrite:
Tap to overwrite the existing values from the destination fixture with the values from the source fixture.
Previous defined values will be deleted.
Example Low Prio Merge
Fixture 31 has a defined color red and a gobo.
Fixture 32 has a defined position pan and tilt.