Brightness or Blue:
To select the brightness or blue of a color, turn the encoder left or right.
Q:
To control the Q-Fader, turn the encoder left or right.
Related Links
Preset Type Bar
Calculator
Effects View
6.14. Command History View
To go to the Command History View, tap More... in the view bar and then Command History .
In this view, you see all the commands you give the console and the response from the console.
Error messages are also displayed.
Every command line start with the clock time (24 hours system) in hours, minutes, seconds and milliseconds.
After the time is the command history displayed.
To scroll vertical, use the vertical scroll bar.
To scroll horizontal, tap in the view and move the view from right to left.
If you are not at the end of the command history, there is a direction arrow displayed.
To go to the end of the command history, tap the direction arrow .
Feedback
To Next Page
Loading...
Need help?
General