Raw Dimmer View
The raw dimmer view is located in the second tab of the dimmer preset type view.
In the raw dimmer view, you control the raw dimmer channel values in percent from the selected fixtures.
All fixture types with a color mix system have a raw dimmer channel in the dot2 to select the brightness.
Encoder Bar Functions
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key . The encoder speed is with decimal place.
To change the encoder speed to ultra slow, press and hold the key and press the encoder key . The
encoder speed equals one DMX step.
Dim (%):
To select the value of the Dim (=Dimmer) turn the encoder left or right.
To open the calculator, press the encoder.
Related Links
Preset Type Bar
Calculator
Effects View
6.20. DMX View
To Next Page
Loading...