Since the number can change depending on your patched fixtures, then it's preferred to use the preset type name.
But then you need to write it in the command line.
+ Preset 1 is often the same as PresetType "Dimmer".
Related links
What is Presets
How to Work with Presets
Preset Pools view
Preset command
PresetType Command
5.54. Prev (Previous) key
The Prev key can be used to step back through the fixtures.
If you don't have a selection of fixtures, it will start with the fixture with the highest ID number. With each press it'll
select the previous fixture, going down in ID number.
If you have a selection of fixtures, then it will step backwards through the selection (in the selection order).
If you have used one of the Odd or Even macros to select some of the fixtures in a total selection, then you can
select the other part of your selection using the Prev key.
The Next key will take you forward through the fixtures. The Set key will reselect all fixtures.
Related links
Next Key
Set Key
5.55. Prvw (Preview) key
To Next Page
Loading...
Need help?
General