10
10
10
11
11
12
12
13
16
18
20
25
28
32
36
39
41
43
44
46
48
50
53
56
59
63
65
68
71
72
72
76
77
78
78
Table of contents
1. Introduction
1.1. Intended Use
1.2. System Requirements dot2 onPC
1.3. Installation of dot2 onPC
1.4. Error Handling
2. Getting Started Guide
2.1. Getting Started Guide - Introduction
2.2. Getting Started Guide - Physical setup and layout - how to connect stuff and what's what
2.3. Getting Started Guide - Create a new empty show and saving it
2.4. Getting Started Guide - Adding and patching dimmers
2.5. Getting Started Guide - Selecting and controlling dimmers
2.6. Getting Started Guide - Programmer - What is it and why do you need it
2.7. Getting Started Guide - Making and working with Groups
2.8. Getting Started Guide - Storing a cue and playback
2.9. Getting Started Guide - Making more cues in main cue list
2.10. Getting Started Guide - Adding LED fixtures
2.11. Getting Started Guide - Working with colors
2.12. Getting Started Guide - Creating the first Presets
2.13. Getting Started Guide - External screen
2.14. Getting Started Guide - Adding moving lights
2.15. Getting Started Guide - Controlling moving lights
2.16. Getting Started Guide - Making more groups and presets
2.17. Getting Started Guide - More about cues and playback
2.18. Getting Started Guide - A look at the Blind, Preview and DMX tester functions
2.19. Getting Started Guide - Fun with Macros
2.20. Getting Started Guide - Building chasers
2.21. Getting Started Guide - Effects
2.22. Getting Started Guide - Connect to onPC, 3D, Wings and Nodes
2.23. Getting Started Guide - Happy Programming
3. What are...
3.1. System Colors
3.2. What is the Programmer
3.3. What is Groups
3.4. What is Presets
3.5. What is Tracking