MA dot2 - [Minus] Command

© 2015 MA Lighting Technology GmbH - Dachdeckerstr. 16 - D-97297 Waldbüttelbrunn - Germany - www.malighting.com
dot2 User Manual
7.3. - [Minus] Command
This page describes the syntax and how to use the - [Minus] command.
Description
With the - [Minus] command you can
deselect objects from a selection list
reduce the dimmer value
call the previous page
Syntax
1. Remove objects from a list:
- 5
2. Reduce dimmer values:
At - 12
3. Call previous page:
Page -
The - [Minus] command is a helping command and needs a second command or a number.
Example 1
328