6.4. Backup Window
To open the Backup Window press Backup on the console.
In this window, you can create a new show, load a show, save the current show, and save the current show as.
Below the title bar is the name of the current show file along with the last save date and time displayed.
To create a new show. Tap New Show. It opens the New Show View.
To load an existing show. Tap Load Show. It opens the Load Show View.
To save the current show. Tap Save Show. It saves the show and close the Backup Window.
To save the current show as a new filename. Tap Save Show as... . It opens the Save Show As View.
If an USB drive is attached, it is displayed below the four functions.
If you save a show and an USB drive is attached, the show will be saved on the USB drive as well.
To leave the Backup Window. Tap in the title bar or press Esc on the console.
Encoder Bar Functions
Select:
To select a function, turn the encoder left or right.
To confirm a selected function, press or tap the encoder.
Related Links
To Next Page
Loading...
Need help?
General